Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 205)

L-force | PLC Designer
Visualization

DMS 4.1 EN 03/2011 TD29 203
The table fields can be edited column by column:
For this purpose for a selected column activate the
checkbox "Use template", whereon a folder entitled
"Template" will expand within the column
properties:
Three types of template elements are available: the
rectangle is entered by default, what may be
changed (into a rounded rectangle or a circle) by a
click in this field. The related configuration
possibilities reflect the element properties of the
selected template element:as usual you can specify
fill and frame color of the element in normal and
alarm state that may also be toggled by an
assigned variable. The alignment of the text within
the column cells (except for the headers) will now
follow the settings of the template.
Note: Instead of the array element entered per
default in the field "Text variables", you may enter
any other variable contained in the project whose
value you want to be displayed. So, in particular, it
is possible to change the ordering of the displayed
array elements within the table.
Changing the columns can also be done in the table
element itself. In the title line perform a mouse-
click on the center of a column and while keeping
the mouse-button pressed draw the column to the
desired position.
In the example below a template has been used for
the first and third column. The template of the first
column corresponds to the settings demonstrated
at left: