Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 921)

L-force | PLC Designer
Device Editors

DMS 4.1 EN 03/2011 TD29 919
Thus the following dialogs might be available:
• NetX configuration of a DP Master of a NetX fieldbus
• DP Parameters of a DP Master
• DP Parameters of a DP Slave
• DP Parameters of a DP-Module
• Profibus DP Configuration of a DP Master or DP Slave
• DP-Module Configuration of an input/output module for a DP device
• DP-Module I/O Mapping of an input/output module for a DP device
• Status
• Information
DP Parameters of a DP Master
Abb. 503 DP Parameters dialog for a DP Master
The DP Parameters of a DP Master are a standard set of parameters to be configured
for each Profibus master. Basically they are defined by the device description file (GS?-
file), but might be edited in the DP Parameters dialog by the user.