Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 565)

L-force | PLC Designer
General Editors

DMS 4.1 EN 03/2011 TD29 563
13 General Editors
13.1 CAM Editor
Der CAM Editor steht nur für »PLC Designer« SoftMotion Steuerungen zur Verfügung.
Diese setzen die Installation des zusätzlichen Softwarepakets »PLC Designer«
SoftMotion voraus.
13.1.1 A brief survey
The SoftMotion CAM disk is integrated in the »PLC Designer« programming interface.
Within the CAM Editor CAM disks (or switches) can be implemented via graphical or
tabular editing. When generating code for the related application, global data
structures (CAM Data) are created, which can be accessed by the IEC program. For this
purpose the library SM3_Basic is included automatically while adding the SoftMotion
drive.
(Hint: Have a look on the exemplary programs and general hints on Using CAMs)
See in the following on this page:
• Definition of a SoftMotion CAM disk
• Creation of CAM disk
• Edit a CAM
• Compilation of the CAM