Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 725)

L-force | PLC Designer
General Editors

DMS 4.1 EN 03/2011 TD29 723
WriteRecipe: This method writes the recipe into the plc variables.
Parameters:
RecipeDefinitionName - Name of the recipe definition.
RecipeName - Name of the recipe.
Return values:
ERR_NO_RECIPE_MANAGER_SET, ERR_RECIPE_DEFINITION_NOT_FOUND,
ERR_RECIPE_NOT_FOUND, ERR_FAILED, ERR_OK
ReloadRecipes: This method reloads the list of recipes from the file system.
Parameters:
RecipeDefinitionName - Name of the recipe definition.
Return values:
ERR_NO_RECIPE_MANAGER_SET, ERR_RECIPE_DEFINITION_NOT_FOUND, ERR_FAILED,
ERR_OK
GetRecipeCount: This method returns the recipe count of the corresponding recipe
definition.
Parameters:
RecipeDefinitionName - Name of the recipe definition.
Return values:
-1 : if the recipe definition is not found