Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 711)

L-force | PLC Designer
General Editors

DMS 4.1 EN 03/2011 TD29 709
The currently reached halt position is indicated by a yellow shadow and the
subsequent, not yet reached one by a red shadow:
Abb. 390 Halt positions shown in an FBD example
Abb. 391 Halt positions shown in an IL example
Note: Notice for breakpoints in methods: A breakpoint will be set automatically in
all methods which might be called. So, if an interface-managed method is called,
breakpoints will be set in all methods of function blocks implementing that
interface and also in all derivative function blocks subscribing the method. If a
method is called via a pointer on a function block, breakpoints will be set in the
method of the function block and in all derivative function blocks which are
subscribing the method.