Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 845)

L-force | PLC Designer
General Editors

DMS 4.1 EN 03/2011 TD29 843
To open the Visualization Manager editor, perform a double-click on the entry in the
device tree or select the entry and use the 'Edit Object' command from the context
menu. The editor opens in a window titled with "Visualization Manager <application
path>, containing the subdialogs Settings and Default Hotkeys.
Settings
Abb. 460 Visualization Manager Editor, Settings
This tab of the Visualization Manager dialog contains settings valid for all
visualizations assigned to the application.
Note: If the Diagnosis Visualization mode is used, the currently not available
settings will be greyed.
File Transfer Mode:
Transfer Visualization Files to the PLC: If this option is activated, the files used for the
visualizations (like image and textlist files) will be copied from the local file system
(see the option described subsequently) to the PLC when the application is
downloaded. For example this is needed for target visualizations, as well as for the
default numpad and keypad visualizations which might be used in the input
configuration of a visualization element.
Use local Visualization files: The textlist and image files used by the visualizations are
read from the local file directory, which is defined in the Project Settings, category
Visualization.
Use Unicode Strings: If this option is activated, all strings used in the visualizations will
be processed in Unicode format.
Use CurrentVisu Variable: If you activate this option, the global string variable
"CurrentVisu" will be taken into account. Thereby, you may control the visualization to
be displayed within the program by setting this variable to the name of the desired
visualization.