Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 844)

L-force | PLC Designer
General Editors
842 DMS 4.1 EN 03/2011 TD29

13.19 Visualization Manager Editor
The Visualization Manager serves for handling common settings for all visualizations
assigned to an application. After modifications the settings will be applied
immediately.
The Visualization Manager object will be added automatically as soon as a
visualization is inserted below an application in the device tree.
The main editor dialog contains separate tabs for the Settings and the Default Hotkeys
configuration.
If supported by the device, additionally the client objects TargetVisualization
respectively WebVisualization will be inserted in the device tree below the
Visualization Manager, providing the settings for Target- resp. Web-Visualizations.
Regard that as from V 3.3.2.0 of the programming system the "Diagnosis Visualization"
mode will be used automatically, if there are no client objects available below the
Visualization Manager. For details please see: Visualization running in the
programming system.
Note: If in a project created with a version < V3.3.2 a defined compiler version had
been set, then the project will behave according to the visualization features
available in that version!
In the following figure the Visualization Manager below 'Application' is responsible for
visualizations PLC_VISU, PLC_VISU_1, Vis2 and Vis3. Target-Visualization is supported.
Abb. 459 Visualization Manager in device tree