Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 831)

L-force | PLC Designer
General Editors

DMS 4.1 EN 03/2011 TD29 829
- Change Shown Visualization
Abb. 448 Input Configuration, Change Shown Visualization
Select one of the following options to define which visualization should be displayed in
online mode on the respective mouse action:
Assign: A visualization can be specified. The Input Assistant will open for this purpose
and offer all visualizations currently available in the project . The selected visualization
will be entered with the complete path, that is "<device name>.<application
name>.<visualization name>".
Assign Expr.: A global variable can be specified which determines the name of the
visualization to be shown. The Input Assistant will open for this purpose. The selected
variable will be entered, for example "GVL1.visustring".
The sequence in which visualizations get displayed in online mode due to user inputs
will be stored internally. With the following two options you can jump back or forward
within this sequence:
Previous Visualization: The previously displayed visualization will be shown again. If
no visualization had been displayed previously, the current one will be kept.
Next Visualization: The visualization following to the active one in the stored
sequence of display will be shown. This is only possible after previously having
changed back from this visualization via 'Previous Visualization'.