Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 532)

L-force | PLC Designer
Menu Commands sorted by Categories
530 DMS 4.1 EN 03/2011 TD29

Align right
Symbol:
Using this command (category Visual Commands) the currently selected visualization
elements will be aligned to the right line of that of those elements which is at the
right- most position.
Align bottom
Symbol:
Using this command (category Visual Commands) the currently selected visualization
elements will be aligned to the bottom line of that of those elements which is at the
most bottom position.
Align horizontal center
Symbol:
Using this command (category Visual Commands) the currently selected visualization
elements will be aligned to the horizontal center of all selected elements.
Align vertical center
Symbol:
Using this command (category Visual Commands) the currently selected visualization
elements will be aligned to the horizontal center of all selected elements
12.34.14 Activate keyboard usage
Symbol:
This command (category Visual Commands) is available in the menu bar for an
integrated visualization. It activates resp. deactivates the keyboard usage in the online
mode of the visualization.
When the keyboard operation is activated, any inputs on elements and the selection of
elements can be done by using certain keys. In this case other commands given via key
shortcuts will not be executed as long as the visualization editor is active and in online
mode.