Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 418)

L-force | PLC Designer
Menu Commands sorted by Categories
416 DMS 4.1 EN 03/2011 TD29

In IL for each instruction line two boxes are used to indicate the current values. One
left to the operator showing the current accumulator value, one right to the operand
showing the operand's value.
Example: Flow Control in IL editor
Regard the possibility to write values also in flow control mode. Forcing values is not
possible! By a double-click on the value box the Prepare Value dialog opens, where you
can enter the desired value.
12.22.24 Display Mode
This option commands (category Online) can be used to choose which of the following
formats should be used for the monitoring display. Perform a mouse-click on the
desired option in the Display Mode submenu. The currently set option is marked by a
tick.
• Binary
• Decimal
• Hexadecimal