Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 936)

L-force | PLC Designer
Device Editors
934 DMS 4.1 EN 03/2011 TD29

Softmotion Device: Scaling/Mapping
This page provides the adjustment of the physical device to its representation within
the application.
Abb. 514 Device Softmotion Editor - Softmotion Device: Scaling/Mapping
scaling:
You have to enter the multiplying factor defining the conversion between the integer
position values received from the device (left entry in the first line) and the technical
units used in the IEC program (right entry in the third line). Additionally, by editing the
further parameter values, a drive can be taken in to account.
In the exemplary configuration a drive creating 3600 increments for one rotation is
scaled such that the technical units used within the application are measured in
radian.