Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 336)

L-force | PLC Designer
Menu Commands sorted by Categories
334 DMS 4.1 EN 03/2011 TD29

Save Project And Save Into Library Repository
Symbol:
This command (category 'File') saves the project as a library in the "System" Library
Repository. This is an extension to saving a project as a library via command "save
Project As...", because the library additionally gets installed on the local system and
thus at once is available for insertion in a project via the Library Manager. Please see
the description of command Save Project As... concerning what you must regard for
creating a library.
Save Project As Compiled Library
This command (category 'File') can be used to save a library project in encoded format.
To be exact, an encoded image of the "precompile context" of the library will be
created, which means that the implementations of the library modules will not any
longer be accessible and visible.
The command opens the standard dialog for saving a file in the file system. The file
type is automatically set to "»PLC Designer« compiled library files". By default the
current project file name is pre-set and can be modified if desired. The file extension is
".compiled-library".
The further handling of *.compiled-library files is the same as for *.library files, that is
they can be installed and referenced in the same way.
So the source code of a library can be protected and additionally shorter loading times
and smaller library files are obtained.
Note: The usual debug functions can not be applied on "compiled libraries", that is
stepping into a library module is not possible.
Merge Project
THIS FEATURE IS CURRENTLY NOT AVAILBLE
Use this command (category 'File') to merge two »PLC Designer« projects, i.e. to copy
another project into the current project. Per default this command is not in the 'File'
menu, but in the 'Project' menu.