Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 691)

L-force | PLC Designer
General Editors

DMS 4.1 EN 03/2011 TD29 689
Abb. 374 IL table editor
Navigating in the table:
• Up- and Down arrow keys: Moving to the field above resp. below
• <Tab>: Moving within a line to the field to the right.
• <Shift> + <Tab>: Moving within in a line to the field to the left.
• <Space>: Open the currently selected field for editing. Alternatively perform a
further mouse-click on the field. If applicable the input assistant will be available
via the
button. A currently opened edit field can be closed by <Enter>,
confirming the current entries, or by <Esc>, cancelling the made entries.
• <Ctrl> + <Enter>: Enter a new line below the current one.
• <Delete>: Remove the current line, that is where you have currently selected any
field.
• Cut, Copy, Paste: To copy one or several lines select at least one field of the line(s)
and use the copy command. To cut a line, use the Cut command. Paste will insert
the previously copied/cut lines before the line where currently a field is selected. If
no field is selected they will be inserted at the end of the network.
• <Ctrl> + <Home> scrolls to the begin of the document and marks the first network.
• <Ctrl> + <End> scrolls to the end of the document and marks the last network
• <PageUp> scrolls one screen up and marks the topmost rectangle.
• <PageDown> scrolls one screen down and marks the topmost rectangle.