Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 479)

L-force | PLC Designer
Menu Commands sorted by Categories

DMS 4.1 EN 03/2011 TD29 477
Batch command: file open
This command (category 'SFC') is used in the SFC-Editor to insert a step and a transition
before the currently selected position.
The positioning (sequence) of the new step and transition depends on whether a step
or transition have been selected when performing the insert command. Automatically
the sequence step-transition-step-transition-... will be kept. See the following picture
for examples:
Abb. 250 Step and Transition inserted
The new step by default is named "Step<n>". n is a running number starting with "0"
for the first step which is inserted in addition to the init step.
The new transition correspondingly by default is named "Trans<n>".
To modify the default names perform a mouse-click on the name string to get it
editable.