RKI Instruments Pioneer 4W - Manual (Page 111)

CO Transmitter • 8 Pioneer Operator’s Manual
Navigating through the Channel Setup Program
Use the program buttons to the right of the display screen to enter the program, move
forward or backward through the program, change settings within the program, and save
or cancel changes to the program settings. Table 2 lists the function of each program
button.
Running the Channel Setup Program
This section describes how to enter the program, display and change program settings,
and save or cancel changes to the program settings.
Entering the channel setup program
1. Open the housing door, and locate the program buttons to the right of the display
screen.
2. Press the ENTER and DOWN/NO buttons simultaneously three times.
The Channel Setup program screen appears.
NOTE: Once you enter the Channel Setup program, the status lights, buzzer, and relays
are disabled until you exit the program.
Table 2: Program Button Functions for the Channel Setup Program
Button Function
ESCAPE • Moves you backward through the program.
• Cancels changes made to the program
settings.
UP/YES • Updates the setting that is displayed on the
display screen.
• Saves changes made to the program settings.
DOWN/NO • Updates the setting that is displayed on the
display screen.
• Enters the program (with the ENTER button).
• Saves changes made to the program settings.
ENTER • Moves you forward through the program.
• Enters the program (with the DOWN/NO
button).
A N Y T O H E R E K Y
V e r s i o n X . X X
C h a n e t S e n
E S C A E A b o r t P
N e x t
p u l