RKI Instruments Pioneer 4W - Manual (Page 83)

Pioneer Operator’s Manual (PRELIMINARY) Oxygen Transmitter • 7
12. Connect the wires to the detector terminal strip of the applicable analyzer card as
shown in Figure 3. The detector terminal strip is the 7-point terminal strip (terminals 1
through 7) on the card.
Figure 3: Wiring the Oxygen Transmitter to the Pioneer Gas Monitor
13. At the Pioneer, connect the cable’s ground wire to an available chassis ground. The
grounding screw on each conduit hub is an example of a chassis ground.
RD
BK
G
W
TOXIC
OXY
—
+
24V
4/20
BATT
FB
+
TOXIC OXY
1 BLK
2 GRN
3 WHT
4 RED
5 4-20
6 24 V
7 Gnd
green
white
Oxygen
Sensor
+ -
Oxygen Detector
Oxygen Amplifier
Detector Terminal Strip
(on Pioneer Analyzer Card)