Noise filter screen, Press the enter button to continue the program, Number of channels screen – RKI Instruments Pioneer 4W User Manual
Page 32
28 • Operation
Pioneer Gas Monitor Operator’s Manual
Noise filter screen
This screen indicates the length of time that the Pioneer averages data. You can choose
from a range of 0.5 to 15.0 seconds (in increments of 0.5). The default setting is
2.5
Seconds
.
NOTE:
The Pioneer continuously displays gas readings although it averages gas
readings according to the noise filter setting.
•
To accept the noise filter setting and continue the program, press the ENTER button.
The program displays the Number of Channels screen.
•
To update the noise filter setting:
1.
Use the UP/YES or DOWN/NO button to display the setting you want.
2.
Press the ENTER button to continue the program.
The program displays the Number of Channels screen.
Number of channels screen
This screen indicates the maximum number of channels possible for the Pioneer. The
settings are displayed in multiples of 4. For example, if you have three Pioneers
networked together, select a setting of 12. You can choose from a range of 4 to16 (in
increments of 4). The default setting is
4
.
•
To accept the number of channels setting and continue the program, press the ENTER
button.
The program displays the Zero Suppression screen.
•
To update the number of channels setting:
1.
Use the UP/YES or DOWN/NO button to display the setting you want.
2.
Press the ENTER button to continue the program.
The program displays the Zero Suppression screen.
N o i s e
F i l t e r
2
S
o
e c
n d s
. 5
M a x
o f
C h a n s :
4
#
i m u m