RKI Instruments Pioneer 4W User Manual
Page 114
Pioneer Operator’s Manual
CO Transmitter • 11
•
To update the fail setpoint setting:
1.
Use the UP/YES and DOWN/NO buttons to change the fail setpoint setting.
2.
Press the ENTER button two times to accept the new setting and continue the
program.
The program displays the Alarm 1 Setpoint screen.
•
To update the alarm type setting:
1.
Press the ENTER button to select the alarm type setting. (The setting flashes when
it is selected.)
2.
Use the UP/YES or DOWN/NO button to change the setting.
3.
Press the ENTER button to accept the new setting and continue the program.
The program displays the Alarm 1 Setpoint screen.
Alarm 1 setpoint screen
This screen indicates the setpoint and alarm type for Alarm 1. The default setting for the
alarm 1 setpoint for the CO channel is
25
. The default setting for the alarm type is
RISE
.
•
To accept the settings and continue the program, press the ENTER button two times.
The program displays the Alarm 2 Setpoint screen.
•
To update the alarm 1 setpoint:
1.
Use the UP/YES and DOWN/NO buttons to change the setpoint.
2.
Press the ENTER button two times to accept the new setting and continue the
program.
The program displays the Alarm 2 Setpoint screen.
•
To update the alarm type setting:
1.
Press the ENTER button to select the alarm type setting. (The setting flashes when
it is selected.)
2.
Use the UP/YES or DOWN/NO button to change the setting.
3.
Press the ENTER button to accept the new setting and continue the program.
The program displays the Alarm 2 Setpoint screen.
Alarm 2 setpoint screen
This screen indicates the setpoint and alarm type for Alarm 2. The default setting for the
alarm 2 setpoint for the CO channel is
50
. The default setting for the alarm type is
RISE
.
•
To accept the settings and continue the program, press the ENTER button two times.
The program displays the Alarm 3 Setpoint screen.
C h a n n e l
1
A l a r m
2 5
P P M
C O
1
R I S E
C h a n n e l
1
A l a r m
5 0
P P M
C O
2
R I S E