Alarm 3 light, Alarm 2 light, Alarm 1 light – RKI Instruments Pioneer 4W User Manual
Page 12: Program buttons, Escape button, Up/yes button, Down/no button, Enter button, Combustible gas, Diffusion1
8 • Description
Pioneer Gas Monitor Operator’s Manual
ALARM 3 light
The ALARM 3 light is to the left of the display screen. The ALARM 3 light turns on when
the Pioneer is experiencing an alarm 3 condition (see Chapter 4, Operation).
ALARM 2 light
The ALARM 2 light is to the left of the display screen and below the ALARM 3 light. The
ALARM 2 light is on when the Pioneer is experiencing an alarm 2 or alarm 3 condition.
ALARM 1 light
The ALARM 1 light is to the left of the display screen and below the ALARM 2 light. The
ALARM 1 light turns on when the Pioneer is experiencing an alarm 1, alarm 2, or alarm 3
condition.
Program Buttons
The Pioneer includes four program button that allow you to enter the instrument
programs, navigate through the programs, update instrument and channel settings, and
save changes to the program settings.
ESCAPE button
The ESCAPE button is above and to the right of the display screen. Use the ESCAPE
button to:
•
move backward through the instrument programs
•
cancel changes you make in the instrument programs
•
enter the Instrument Setup program (when pressed with the ENTER button)
UP/YES button
The UP/YES button is to the right of the display screen and below the ESCAPE button.
Use the UP/YES button to:
•
change settings within the instrument programs
•
enter the Calibration program (when pressed with the ENTER button)
DOWN/NO button
The DOWN/NO button is to the right of the display screen and below the UP/YES
button. Use the DOWN/NO button to:
•
change settings within the instrument programs
•
enter the Channel Setup program (when pressed with the ENTER button)
ENTER button
The ENTER button is to the right of the display screen and below the DOWN/NO button.
Use the ENTER button to:
•
move forward through the instrument programs
•
save changes you make in the instrument programs
•
enter the Instrument Setup program (when pressed with the ESCAPE button)
•
enter the Calibrate program (when pressed with the UP/YES button)
•
enter the Channel Setup program (when pressed with the DOWN/NO button)