Running the channel setup program – RKI Instruments Pioneer 4W User Manual
Page 56
Combustilbe Gas Transmitter • 10
Pioneer Operator’s Manual (PRELIMINARY)
Running the Channel Setup Program
This section describes how to enter the program, display and change program settings,
and save or cancel changes to the program settings.
Entering the channel setup program
1.
Open the housing door, and locate the program buttons to the right of the display
screen.
2.
Press the ENTER and DOWN/NO buttons simultaneously three times.
The Channel Setup program screen appears.
NOTE:
Once you enter the Channel Setup program, the status lights, buzzer, and relays
are disabled until you exit the program.
3.
Press the UP/YES, DOWN/NO, or ENTER button to continue.
The program asks if you want to setup Channel 1.
4.
To display or change settings for Channel 1, press the ENTER button (the program
displays the Channel Status screen.) To continue to Channel 2 settings, press the
UP/YES button. To go to Channel 4 settings, press the DOWN/NO button.
NOTE:
The screens illustrated in this section are examples and describe the Channel
Setup program for Channel 1.
A N Y
T
O
H E R
E
K
Y
V e r s i o n
X . X X
C h a n
e
t
S e
n
E S C A
E
A b o r t
P
N e x t
p
u
l
E N T E R
S e t
p
u
-
C h a n n e l
1
u
t -
E S C A
E
t
x i
P
U P / D
C
a n g e
C
N
N o w
S e
E
p
h
h a n n e l