Rockwell Automation 20-COMM-I Interbus Adapter - Manual (Page 100)

B-6 Adapter Parameters
47 PODD W4 Actual
Actual Process Output Data Description for Word
4. Value: See Table B.1
Type: Read Only
48 PODD W5 Cfg
Configured Process Output Data Description for
Word 5. PCP Object to use for Word 5 received
from Interbus master. Default: 0
Setting: See Table B.1
Type: Read/Write
Reset Required: No (becomes active
when Interbus network
is restarted)
49 PODD W5 Actual
Actual Process Output Data Description for Word
5. Value: See Table B.1
Type: Read Only
50 PODD W6 Cfg
Configured Process Output Data Description for
Word 6. PCP Object to use for Word 6 received
from Interbus master. Default: 0
Setting: See Table B.1
Type: Read/Write
Reset Required: No (becomes active
when Interbus network
is restarted)
51 PODD W6 Actual
Actual Process Output Data Description for Word
6. Value: See Table B.1
Type: Read Only
52 PODD W7 Cfg
Configured Process Output Data Description for
Word 7. PCP Object to use for Word 7 received
from Interbus master. Default: 0
Setting: See Table B.1
Type: Read/Write
Reset Required: No (becomes active
when Interbus network
is restarted)
53 PODD W7 Actual
Actual Process Output Data Description for Word
7. Value: See
Type: Read Only
54 PODD W8 Cfg
Configured Process Output Data Description for
Word 8. PCP Object to use for Word 8 received
from Interbus master. Default: 0
Setting: See Table B.1
Type: Read/Write
Reset Required: No (becomes active
when Interbus network
is restarted)
55 PODD W8 Actual
Actual Process Output Data Description for Word
8. Value: See Table B.1
Type: Read Only
56 PCP Comm Cfg
Enable Interbus PCP communications. Default: 1 = Enable
Values: 0 = Disable
1= Enable
Type: Read/Write
57 PCP Comm Act
Actual PCP Configuration Default: 1 = Enable
Values: 0 = Disable
1= Enable
Type: Read Only
Parameter
No. Name and Description
Details
20COMM-UM007A-EN-P.book Page 6 Tuesday, January 22, 2002 10:52 AM