Rockwell Automation 20-COMM-I Interbus Adapter - Manual (Page 23)

Chapter
3
Configuring the Adapter
Chapter 3 provides instructions and information for setting the
parameters in the adapter.
For a list of parameters, refer to Adapter Parameters . For definitions of
terms in this chapter, refer to the Glossary .
The Interbus adapter stores parameters and other information in its own
non-volatile memory. You must, therefore, access the adapter to view
and edit its parameters. The following tools can be used to access the
adapter parameters:
Topic Page Topic Page
Configuration Tools 3-1 Setting a Fault Action 3-6
Using the PowerFlex HIM 3-2 Resetting the Adapter 3-7
Setting the I/O Configuration 3-3
Configuration Tools
Tool Refer To:
DriveExplorer Software (version 2.01
or higher) DriveExplorer Getting Results Manual,
Publication 9306-GR001B-EN-E, or the online
help
Drive Tools 2000 Software (version
1.01 or higher) DriveExecutive Online Help
PowerFlex HIM page 3-2
20COMM-UM007A-EN-P.book Page 1 Tuesday, January 22, 2002 10:52 AM