Rockwell Automation 20-COMM-I Interbus Adapter - Manual (Page 95)

Appendix
B
Adapter Parameters
Appendix B provides information about the Interbus adapter parameters.
The parameters in the adapter are numbered consecutively. However,
depending on which configuration tool you use, they may have different
numbers.
Topic Page
About Parameter Numbers B-1
Parameters List B-1
About Parameter Numbers
Configuration Tool Numbering Scheme
• DriveExplorer
• DriveExecutive
• HIM
• Explicit Messaging
The adapter parameters begin with parameter 1. For
example, Parameter 01 - [DPI Port] is parameter 1 as
indicated by this manual.
Parameters List
Parameter
No. Name and Description
Details
01 [DPI Port]
Port to which the adapter is connected. This will
usually be port 5. Default: 0
Minimum: 0
Maximum: 7
Type: Read Only
02 [DPI Data Rate]
Data rate used by the drive. This data rate is set in
the drive, and the adapter detects it. Default: 0 = 125 K
Values: 0 = 125 K
1 = 500 K
Type: Read Only
03 [Ref/Feedback Size]
Size of the Reference/Feedback. The drive
determines the size of the Reference/Feedback. Default: 0 = 16-bit
Values: 0 = 16-bit
1 = 32-bit
Type: Read Only
20COMM-UM007A-EN-P.book Page 1 Tuesday, January 22, 2002 10:52 AM