Rockwell Automation 20-COMM-I Interbus Adapter - Manual (Page 37)

Configuring the Interbus Scanner 4-5
Figure 4.3 Entering a name for the new Interbus project
3. Right-click on the PLC/PC icon and select Description. Enter
a name for the controller and any additional information desired, as
shown in
Figure 4.4 . Click OK when complete.
Figure 4.4 Entering a name for the Interbus controller
4. Right-click on the Program icon and select Description. Enter
a name for the program (using the actual RSLogix500 file name is
recommended), and any additional information desired, as shown in
Figure 4.5 . Click OK when complete.
Figure 4.5 Entering a name for the Interbus program.
20COMM-UM007A-EN-P.book Page 5 Tuesday, January 22, 2002 10:52 AM