Rockwell Automation 20-COMM-I Interbus Adapter - Manual (Page 20)

2-4 Installing the Adapter
1. Remove power from the drive.
2. Use static control precautions.
3. Connect the Internal Interface cable to the DPI port on the drive and
then to DPI connector on the adapter.
Figure 2.2 DPI Ports and Internal Interface Cables
Connecting the Adapter to the Drive
# Description # Description
➊ 15.24 cm (6 in.) Internal Interface cable ➌ Interbus connectors
➋ DPI Connector ➍ 2.54 cm (1 in.) Internal Interface cable
PowerFlex 700 Drive
2 Frame & Larger PowerFlex 700 Drive
0 - 1 Frame
PowerFlex 70 Drive
➋
➌
➍
➊
Interbus Adapter
20COMM-UM007A-EN-P.book Page 4 Tuesday, January 22, 2002 10:52 AM