Rockwell Automation 20-COMM-I Interbus Adapter User Manual
Page 39
Advertising
Configuring the Interbus Scanner
4-7
9. Right-click on the Controller Board icon
and select Type. Set
the type to “IBS USC/4(4K)” and click OK. This identifies the type
of Interbus controller used on the SST scanner. (See
Figure 4.8 Selecting the Interbus Controller type
10. Right-click on the Controller Board icon and select Description.
Enter “SST-IBS-SLC” in the name field, as shown in
.
Figure 4.9 Entering a Description for the Controller Board
20COMM-UM007A-EN-P.book Page 7 Tuesday, January 22, 2002 10:52 AM
Advertising