Summary of changes, New and updated information – Rockwell Automation 1794-IRT8XT FLEX I/O Thermocouple/RTD /Millivolt Input Module User Manual User Manual
Page 3
iii
Publication 1794-6.5.12 - September 2011
Summary of Changes
This manual contains new and updated information. Changes throughout this
revision are marked by change bars, as shown to the right of this paragraph.
New and Updated
Information
This table contains the changes made to this revision.
Additional less significant changes (such as improvement of drawings) have
been made throughout the document.
Changes
Page
Addition of two catalogs – 1794-IRT8K and 1794-IRT8XT
The following sections have been added to Chapter 1 – Overview of FLEX I/O
and Your Thermocouple, RTD, and Millivolt Input Module:
•The FLEX System
•Types of Modules
•What the FLEX I/O Input Module Does
•The FLEX I/O Module in a Logix Control System
The following section has been added to Chapter 2 – Install Your FLEX I/O Input
Module:
•Series A and Series B
The following new topics have been added:
•Configure Your FLEX I/O Module with RSLogix 5000 Software
(Chapter 3)
•Troubleshoot the Module (Chapter 6)
51
•Electronic Data Sheet (EDS) Files (Appendix B)
The following topic, previously Chapter 3 in the last revision, has been
relegated to the Appendices section:
•Program Your Thermocouple/RTD Input Module (Appendix C)