Rockwell Automation 1794-IRT8XT FLEX I/O Thermocouple/RTD /Millivolt Input Module User Manual - Manual (Page 38)

Publication 1794-6.5.12 - September 2011
26 Configure Your FLEX I/O Module with RSLogix 5000 Software
You should see the FLEX I/O module in the I/O Configuration tree.
To be able to check if your configured parameters are acceptable and the
configuration is successful, you need to go online.
Refer to the RSLogix 5000 Online Help for detailed descriptions of the
configuration parameters.
Chapter Summary This chapter provided instructions and required parameters for setting up your
FLEX I/O module on an EtherNet/IP network.