Rockwell Automation 1794-IRT8XT FLEX I/O Thermocouple/RTD /Millivolt Input Module User Manual - Manual (Page 35)

Publication 1794-6.5.12 - September 2011
Configure Your FLEX I/O Module with RSLogix 5000 Software 23
4. Click the Connection tab. Specify a value for the Requested Packet
Interval (RPI).
5. Click the Module Info tab to see Module Identification and Status
information. These fields are populated when the module goes online.
6. Click the Input Configuration tab and specify the values for the
following fields:
• Channel
• Sensor
• Sensor Mode
• Input Filter Cutoff
• Data Format