Rockwell Automation 1794-IRT8XT FLEX I/O Thermocouple/RTD /Millivolt Input Module User Manual - Manual (Page 43)

Publication 1794-6.5.12 - September 2011
Read and Write Configuration Maps for the FLEX I/O Module 31
module uses up to 11 words of input data and up to 4 words of output data.
Each word is composed of 16 bits.
Thermocouple and RTD Input Module Image Table Mapping
Block Transfer Read and Write
The following block transfer read and write word bit information is presented
for experienced users only.
Module Image
I/O Image
Input Data Channel 0
Input Data Channel 1
Input Data Channel 2
Input Data Channel 3
Input Data Channel 4
Input Data Channel 5
Input Data Channel 6
Input Data Channel 7
Underrange
Input Size
Output Size
0...4 Words
1...11 Words
Overrange
Diagnostics CJC Channel Faults
EDT command and data response
EDT command and data
RTD Offsets for each channel
Sensor Type Sensor Type Mode Mode TC/RTD TC/RTD
Filter Cut Reference Jct Data Format FM
SAB
45333
Input Map (Block Transfer Read)
Dec. 15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00
Oct. 17 16 15 14 13 12 11 10 07 06 05 04 03 02 01 00
Word 0 Channel 0 Input Data
Word 1 Channel 1 Input Data
Word 2 Channel 2 Input Data
Word 3 Channel 3 Input Data
Word 4 Channel 4 Input Data
Word 5 Channel 5 Input Data