Rockwell Automation 1794-IRT8XT FLEX I/O Thermocouple/RTD /Millivolt Input Module User Manual - Manual (Page 34)

Publication 1794-6.5.12 - September 2011
22 Configure Your FLEX I/O Module with RSLogix 5000 Software
1. In the I/O Configuration tree, right-click the 1794-AENT adapter, and
select New Module.
2. The Select Module dialog appears. Select the FLEX I/O module and
click OK.
3. Complete the following fields in the New Module dialog that appears.
Click OK.
• Name
• Description
• Comm Format
• Electronic Keying
Right-click the local adapter module.
Select New Module.