Rockwell Automation 1772-LS_LSP,D17726.8.6 PROG/OPER MANUAL-MINI PLC-2/05 - Manual (Page 109)

Math Instructions
Chapter 10
10Ć21
4. Enter <data> if appropriate.
5. Press -[G]-.
6. Enter <address>.
7. Enter <data> if appropriate.
The second group of steps you perform enters the branch for the number to be
converted (term F).
1. Open the rung. Press the branch start key [ ].
2. Press -[G]-.
3. Enter <address>.
4. Enter <data> if appropriate.
5. Close the branches. press the branch end key [ ].
6. Close the rung. Press [SHIFT][EAF].
7. Enter 14 (function number).
8. Enter 010 (data address).
9. Enter <result address>.
Editing a Completed Rung
Operand and Result: Follow the editing procedures for a Get instruction.
EAF Instruction: You edit an EAF instruction to change an address by
performing the following steps.
1. Press [SHIFT][EAF].
2. Enter 14 (function number).
3. Enter 010 (data address).
4. Enter <result address>.
We showed you how to program different types of math functions. The next
chapter tells how to transfer data files.
Chapter Summary