Rockwell Automation 1772-LS_LSP,D17726.8.6 PROG/OPER MANUAL-MINI PLC-2/05 - Manual (Page 30)

Hardware
Chapter 3
3-4
MiniĆPLCĆ2/05 Processor (cat. no. 1772ĆLSP)
The Mini-PLC-2/05 Processor (cat. no. 1772-LSP) contains all the
hardware features of the LS processor and in addition contains the
following (Figure 3.2):
Figure 3.2
MiniĆPLCĆ2/05 Processor with Power Supply (cat. no. 1772ĆLSP)
10717ĆI
AĆB
P/S
ACTIVE
P/S
PARALLEL
POWER
ON
OFF
I.0A 125V
SLOW BLOW
INTFC
120V
AC
L1
N
GND
MEMORY
STORE
ON
ON
P
R
O
C
RUN
FAULT
MINI PLCĆ2/05
W Power Supply
Processor Status Indicator
P/S ACTIVE: This green LED keeps you informed of the power supply
section’s operating conditions (table 3.A).
P/S PARALLEL (socket)
Purpose: Enables paralleling connections between these two sockets on
two power supply modules.
POWER (switch)
Purpose: This is on/off toggle switch lets you provide power to
your processor.
If the switch is: Then you are:
On Supplying power to your processor module.
Off Not supplying power to your processor module.