Rockwell Automation 1772-LS_LSP,D17726.8.6 PROG/OPER MANUAL-MINI PLC-2/05 - Manual (Page 276)

Quick Reference
Appendix C
CĆ20
Table C.S
Report Generation Commands
Command Key Sequence Description
Enter report generation function [RECORD[[DISPLAY] or Set baud rate,
(Message Code Keys)
Puts industrial terminal into report generation function.
Same (entered from a peripheral device).
Message store [M][S][,](Message Number)
[RETURN]
Stores message in processor memory.
Use [ESC] to end message.
Message print [M][P][,](Message Number)
[RETURN]
Prints message exactly as entered.
Message report [M][R][,](Message Number)
[RETURN]
Prints message with current data values or bit status.
Message delete [M][D][,](Message Number)
[RETURN]
Removes message from processor memory.
Message index [M][I][RETURN] Lists messages used and the number of words in
each message.
Automatic report generation [SEARCH][4][0] or [M][R][RETURN] Allows messages to be printed through program control.
Same (entered from a peripheral device).
Exit automatic report generation [ESC] or [CANCEL COMMAND]
1
Terminates automatic report generation.
Exit report [ESC] or [CANCEL COMMAND]
1
Returns to ladder diagram display.
Terminates Report Generation Function.
[CANCEL COMMAND] can only be used if the function was entered by a command from a peripheral device.
1