Rockwell Automation 1772-LS_LSP,D17726.8.6 PROG/OPER MANUAL-MINI PLC-2/05 - Manual (Page 36)

Hardware
Chapter 3
3-10
fifth row of keys
SHIFT
access function on top
half of keys that support
two functions
CANCEL
COMMAND
end current function
without saving
move cursor left
SHIFT – move cur-
sor left
SHIFT – move cur-
sor right
move cursor
right
Ć( + )Ć
enter 3Ćdigit add
Ć(PUT)Ć
enter put
Ć(IOT)Ć
enter immediate output
Ć(ZCL)Ć
enter zone control
last state
Ć(RTR)Ć
enter retentive timer reset
Ć( )Ć
enter output energize enter examine on
FORCE
ON
specify force off
0
enter a 0
FORCE
OFF
specify force off
5. Turn the power switch on the front of the industrial terminal to the
ON position.
6. After a short while the following display will appear.
DIAGNOSTICS PASSED
MODE SELECTION
KEYBOARD MODULE 1770-FDC SERIES B/E
FOR USE WITH
THE FOLLOWING
PROCESSORS:
INSERT
KEYTOP OVERLAY: MODE:
10 = PLC
= PLC-2 11
12 = ALPHANUMERIC
1770-KBA
1770-KCB
1770-KAA
PLC
MINI-PLC-2, PLC-2
MINI-PLC-2/15
PLC-2/20 (LP1)
PLC-2/20 (LP2)
PLC-2/30
SELECT DESIRED MODE?
11595
Select your desired processor mode by pressing 11 on the
1770-T3 terminal.
7. After initialization has been completed, select the processor mode of
operation using the keystrokes below: