Rockwell Automation 2711 PanelBuilder Software Getting Started - Manual (Page 101)

SLC Ladder Logic Program for DH-485/DH+ Application A–4
Publication 2711-6.2
Rung 2:15
| +LIM–––––––––––––––+ +MOV–––––––––––––––+ |
|–+LIMIT TEST +––––––––––––––––––––––––––––––––––––+MOVE +–|
| |Low Lim 0| |Source 50| |
| | | | | |
| |Test N7:1| |Dest N7:3| |
| | 0| | 0| |
| |High Lim 50| +––––––––––––––––––+ |
| | | |
| +––––––––––––––––––+ |
Rung 2:16
| +LIM–––––––––––––––+ +MOV–––––––––––––––+ |
|–+LIMIT TEST +––––––––––––––––––––––––––––––––––––+MOVE +–|
| |Low Lim 51| |Source 0| |
| | | | | |
| |Test N7:1| |Dest N7:3| |
| | 0| | 0| |
| |High Lim 949| +––––––––––––––––––+ |
| | | |
| +––––––––––––––––––+ |
Rung 2:17
| |
|–––––––––––––––––––––––––––––––––––––+END+––––––––––––––––––––––––––––––––––––|
| |