Rockwell Automation 2711 PanelBuilder Software Getting Started - Manual (Page 90)

Chapter
7
Publication 2711-6.2
Validating and Downloading
the Application
This chapter contains the following sections.
Sections Page
Validating the Application 7–1
Downloading the Application 7–2
Closing the Application 7–4
This section shows how to validate the application for errors.
To validate the sample application:
1. From the Application menu choose Validate All.
The following dialog opens when the application passes
validation.
2. Click OK.
If the application does not pass validation, the Exceptions dialog
opens listing all errors found. You must correct errors and then
re-validate the application. Warnings do not have to be corrected.
Click to
close dialog
For details on how to correct the errors and the meaning of the
errors, see the PanelBuilder Software user manual (Publication
2711-6.0).
Chapter Objectives
Validating the Application