Rockwell Automation 2711 PanelBuilder Software Getting Started - Manual (Page 75)

4–41 Creating the Sample Application
Publication 2711-6.2
3. Create the Ack alarm button.
•
Choose Acknowledge from the Objects " Alarm Buttons
submenu.
•
Position pointer (+) within the right side of the banner. Click
the left mouse button to place the Ack button as shown below.
•
Click the right mouse button to exit Ack button mode.
•
Double-click the Ack button to open its dialog. Select the F7
function key and then click OK to close the dialog.
•
Enter inner text mode, append F7 (press Enter after Ack , then
type F7) to the text, then exit inner text mode.
Message does not appear in
display until you configure
alarm messages.
To define the alarm trigger:
1. Double-click the Alarm Message Display in the Alarm Banner.
Or choose Alarm Setup from the Application menu.
The Alarm Setup dialog opens.
2. Click the Alarm Triggers tab.
Type Messages Select Value
3. Click in the Trigger Tag field and type Messages.
4. Click in the Trigger Type field and select Value from the list.