Rockwell Automation 2711 PanelBuilder Software Getting Started - Manual (Page 35)

Chapter
4
Publication 2711-6.2
Creating the Sample
Application
This chapter shows how to create the sample application and
contains the following sections.
You can create the entire application or part of the application. The
complete DH-485 (or DH+) and Remote I/O applications are
provided on the installation disk and are stored in
C:\AB\PBWIN\GS\
Section Page
Starting PanelBuilder 4–2
Opening a New Application File 4–3
Creating the Motor Status Screen 4–4
Opening a New Screen 4–4
Setting Grid Attributes 4–5
Creating the Start Motor Push Button 4–6
Creating the Stop Motor Push Button 4–8
Creating the Motor Speed Screen Button 4–11
Creating a Goto Config Screen Button 4–12
Creating the Select Mode Control List 4–13
Creating Control List Keys 4–16
Creating the Mode Indicator 4–17
Creating the Status Indicator 4–21
Closing the Motor Status Screen 4–24
Creating the Motor Speed Screen 4–25
Opening the Toolbox and Color Palette 4–25
Opening a New Screen 4–26
Creating the Increase Speed Push Button 4–26
Creating the Decrease Speed Push Button 4–28
Creating the Motor Status Screen Button 4–29
Creating the Speed Bar Graph and Scale 4–31
Creating the Speed Numeric Entry Object 4–34
Creating the RPM Data Display 4–37
Closing the Toolbox and Color Palette 4–39
Closing the Motor Speed Screen 4–39
Linking the Motor Status and Motor Speed Screen 4–39
Creating Alarms 4–40
Saving the Application 4–43
Chapter Objectives