Rockwell Automation 2711 PanelBuilder Software Getting Started - Manual (Page 11)

Preface P–6
Publication 2711-6.2
Application and Ladder Logic Program
The PanelBuilder installation disks contain:
•
Getting Started application (.PBA files) for each of the
PanelView terminals.
•
Required ladder logic to run the application, including:
– SLC ladder logic files for DH-485/DH+ application
– PLC ladder logic files for Remote I/O application
– PLC ladder logic files for DH+ application
The files are stored on your computer as follows:
DH-485 or DH+ Application C:\AB\PBWIN\GS\5BV2485.PBA
5KV2485.PBA
6BV2485.PBA
6KV2485.PBA
9CKV2485.PBA
9CTV2485.PBA
9MKV2485.PBA
9MTV2485.PBA
10KC_485.PBA
10KG_485.PBA
10TC_485.PBA
10TG_485.PBA
14MKV2485.PBA
14MTV2485.PBA
SLC Ladder Logic Files C:\AB\SLC500\GS\GETSTRTD.AC$
GETSTRTD.ACH
GETSTRTD.B0$
GETSTRTD.B1$
GETSTRTD.B2$
GETSTRTD.IX$
GETSTRTD.LX$
GETSTRTD.NAM
GETSTRTD.OP$
GETSTRTD.PC$
GETSTRTD.XD$
GETSTRTD.XO$
Remote I/O Application C:\AB\PBWIN\GS\5BV2RIO.PBA
5KV2RIO.PBA
6BV2RIO.PBA
6KV2RIO.PBA
9CKV2RIO.PBA
9CTV2RIO.PBA
10KC_RIO.PBA
10KG_RIO.PBA
10TC_RIO.PBA
10TG_485.PBA
9MKV2RIO.PBA
9MTV2RIO.PBA
14MKV2RIO.PBA
14MTV2RIO.PBA