Rockwell Automation 2711 PanelBuilder Software Getting Started - Manual (Page 73)

4–39 Creating the Sample Application
Publication 2711-6.2
Closing the Toolbox and Color Palette
To close the toolbox and color palette:
Choose Toolbox and then Color Palette from the View menu.
Or double-click the control-menu box in the upper left of each box.
Closing the Motor Speed Screen
To close the MOTOR SPEED screen:
Choose Close from the Screen menu.
Or double-click the control-menu box on the screen.
Control_menu box
The Application File window now shows 2 screens.
To link the Motor Speed screen to the Motor Status screen:
1. Double-click Motor Status to open the screen.
2. Double-click the Motor Speed screen button to open its dialog.
3. Set the properties as shown below.
Select Motor Speed
Select F8 for PV900/PV1400 terminals
Select F5 for PV600 terminals
4. Click OK to close dialog.
5. Choose Close from Screen menu to close the Motor Status screen.
Linking the Motor Speed
and Motor Status Screens