Rockwell Automation 2711 PanelBuilder Software Getting Started - Manual (Page 81)

5–4 PanelView Terminal Setup
Publication 2711-6.2
This section shows how to define DH-485 runtime communication
parameters for the DH-485 (or RS-232) version of the PanelView
terminal.
To configure DH-485 communications:
1. Choose Terminal Setup from the Application menu.
2. Select the Setup tab.
The dialog shows the name and type of PanelView 900 terminal
defined for the application. The dialog would look similar for
any PanelView terminal.
The terminal name was defined when the application was created.
3. Click from the Setup tab.
The DH-485 Communication Setup dialog opens for the terminal.
4. Set parameters to match those shown in the dialog below.
DH-485 Communications Dialog
Terminal Name
from Setup tab
Select 19200
Select 1
Select 2
Select 31
Type SLC_1
5. Click the Apply button.
6. Click OK to return to the Terminal Setup dialog.
7. Click OK to close the Terminal Setup dialog.
Defining DH-485
Communication Settings
"