Rockwell Automation 2711 PanelBuilder Software Getting Started - Manual (Page 78)

Chapter
5
Publication 2711-6.2
PanelView Terminal Setup
This chapter shows how to define the power-up options and runtime
communication parameters for the PanelView terminal.
When defining communication parameters, refer to either the
DH-485, Remote I/O, or DH+ section depending on the terminal
type you are using.
Section Page
Defining Remote I/O Communication Settings 5–2
Defining DH-485 Communication Settings 5–4
Defining DH+ Communication Settings 5–5
Setting Terminal Power-Up Options 5–6
Saving the Application 5–6
Chapter Objectives