Rockwell Automation 2711 PanelBuilder Software Getting Started - Manual (Page 23)

2–2 Initial System Setup
Publication 2711-6.2
System Components for PanelView with RS-232 (DH-485) Port
•
RS-232 PanelView Terminal
•
Personal Computer with installed:
– PanelBuilder Software
– Advanced Programming Software (APS)
•
SLC 5/03 or 5/04 Controller
•
One Communication Cable (Catalog No. 2711-NC13,-NC14
or 2706-NC13)
Node 0
Personal Computer
PanelBuilder
Node 2
PanelView 900 RS-232 Terminal Shown
Node 1
SLC 5/03 or 5/04 Controller
Cable
Catalog No. 2711-NC13,
2711-NC14, 2706-NC13
Note: The same cable is used for transferring applications to the terminal and
for connecting the terminal to the SLC 5/03 or 5/04 Controller. After downloading
the application, disconnect the cable from the computer and connect to Channel
0 Port of SLC 5/03 or 5/04.
To Channel 0
Serial Port
COM1 or COM2