Rockwell Automation 2711 PanelBuilder Software Getting Started - Manual (Page 8)

Preface P–3
Publication 2711-6.2
This section lists the items needed to create, download and run the
sample application in a PanelView terminal using either:
•
Remote I/O communications
•
DH-485 communications
•
DH+ communications
Personal Computer
The minimum system requirements for installing and running
PanelBuilder Software on a personal computer are:
•
Personal computer with a 386 or higher processor
•
MS-DOS
R operating system version 5.0 or later
•
Windows
R 3.1 or later (Windows for Workgroups 3.11 or later),
Windows 95, or Windows NT 4.0.
•
500K free conventional memory
•
at least 40 MB available hard disk space
•
VGA or other high-resolution display supported by Windows
•
Mouse or other Windows pointing device
PanelBuilder Software
The PanelBuilder Software (Catalog No. 2711-ND3) is required to
create applications on a computer for PanelView terminals.
Install the PanelBuilder Software as described in Chapter 2 of the
PanelBuilder Software manual.
What You Need
"