Rockwell Automation 2711 PanelBuilder Software Getting Started - Manual (Page 77)

4–43 Creating the Sample Application
Publication 2711-6.2
To save the application file:
1. Choose Save from the File menu.
Or click on the tool bar.
The Save As dialog box opens. The File Name box shows the first 8
characters of the application name with the .pba file type (default).
If the application was previously saved, the Save As dialog would
not open. The application would be automatically saved under the
name previously entered in the Save As dialog.
2. Type gtstart.pba in the File Name box.
3. Click the OK button.
The file GTSTART.PBA is saved to the C:\AB\PBWIN folder.
PanelBuilder adds the .PBA extension.
You just finished creating the screens for the getting started
application.
The next chapter will show how to set the power-up and runtime
communication settings for the PanelView terminal.
Saving the Application
"
Summary