Rockwell Automation 2711 PanelBuilder Software Getting Started - Manual (Page 40)

4–6 Creating the Sample Application
Publication 2711-6.2
Creating the Start Motor Push Button
To create the START
MOTOR
F1
push button:
1. From the Objects " Push Buttons submenu choose Momentary.
2. Position pointer (+) in lower left area of the screen, click the left
mouse button and drag the pointer diagonally to size the button.
3. Click the right mouse button to exit push button mode.
To set the properties of the push button:
1. Double-click the push button to open its dialog.
2. Set the properties as shown below.
Click Single Button
Select F1
Type Motor_Start
Type Motor_Start_Ind
Creating the
Motor Status Screen