Rockwell Automation 2711 PanelBuilder Software Getting Started - Manual (Page 63)

4–29 Creating the Sample Application
Publication 2711-6.2
To configure the states of the copied button:
1. Click the States tab on the Push Buttons dialog.
2. In the Text field of state 0, replace /*R*/INC SPD/*R*/F1 with
/*R*/DEC SPD/*R*/F2
3. In the Text field of state 1, replace /*R*/INC with /*R*/DEC
4. Click OK to close the dialog.
Creating the Motor Status Screen Button
The following procedure uses the Copy and Paste functions to copy
the MOTOR SPEED button from the MOTOR STATUS to the
MOTOR SPEED screen.
1. From the Window menu choose Getting Started to activate the
Application File window.
2. Double-click on MOTOR STATUS to open screen 1.
3. Select MOTOR
SPEED
F8
on the Motor Status screen.
State 0
DEC SPD
F2
State 1
DEC