Rockwell Automation 2711 PanelBuilder Software Getting Started - Manual (Page 76)

4–42 Creating the Sample Application
Publication 2711-6.2
To define alarm messages:
1. Click the Alarms tab.
A spreadsheet opens. Each row represents an alarm message.
Use the horizontal scroll bar to
view fields not shown.
1. Edit the following fields for alarm message 1 (row 1):
•
In the Text field, type MOTOR SPEED TOO HIGH.
•
In the Value/Bit field, type 950.
•
In the Trigger field, select Messages.
•
In the ACK field, select the check box.
2. Click the right mouse button and choose Append Alarm from the
popup menu. A new row is added with defaults from row 1.
3. Edit the following fields for alarm message 2 (row 2):
•
In the Text field, type MOTOR SPEED TOO LOW.
•
In the Value/Bit field, type 50.
•
Verify that the ACK field check box is selected.
4. Click on row 1 to display this message in the display.
5. Click OK to exit the Alarm Setup dialog.
To close the Alarm Banner:
Choose Close from the Screen menu.
Or double-click the control-menu box on the screen.
The Application File window now shows the Alarm Banner and 2
screens.