Rockwell Automation 2711 PanelBuilder Software Getting Started - Manual (Page 96)

8–3 Running the Application
Publication 2711-6.2
This section shows how to control and monitor the motor in manual
mode. All keys that are pressed in the procedure that follows are
located on the PanelView terminal.
To control and monitor the status of the motor in manual mode:
1. Press and then to select Manual from the Select Mode
control list.
Or if the terminal has a touch screen, press the equivalent list
keys to right of the control list.
The Mode indicator shows that the motor is in Manual mode.
2. Press the
F8
key to return to the Motor Speed screen.
Or if the terminal has a touch screen, press MOTOR
SPEED
The screen shows the current speed of the motor.
100
100
In manual mode, you can enter a new motor speed, increase or
decrease the motor speed. The bar graph and numeric data
display are automatically updated to reflect the change in speed.
3. Press to open the scratchpad.
Or if the terminal has a touch screen, press the Enter Speed object
to open the touch screen scratchpad.
Running the Motor
in Manual Mode